Date: | May, 06 2002 at 17:59:52 | Description: | The wire is foamed, cut to shape, then the wire is all removed, wherever possible.
The foam is then covered in latex paint, to keep the bondo from eating away
at the foam underneath. On the bottom you can see the results of the 2part
polyurethane foam mix. This stuff is incredible. One box did all that, cost about 20 bux,
and dried in under 10 minutes. It's far more dense than the spray foam, doesn't
form huge interior bubbles, and is a dream to cut and work with. Spary foam
sucks. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 35mm)
CCD Width : 7.06mm
Exposure time: 0.017 s (1/60)
Aperture : f/2.0
Focus Dist. :32.63m
Metering Mode: center weight
Jpeg process : Baseline
|
|