Date: | November, 17 2004 at 15:53:36 | Description: | Door closed, with one of the supporting struts on. For normal operation, this
door really needs two struts. (the provided struts are 300lb struts!).
However, I plan to install a linear actuator to power lift the door in the
future, so we only put one on. We drilled a hole, and basically just welded
the ball joint onto the car. You can see here why we had to edit the wheel
well a bit, as when the door opens, that part rolls inwards and would hit the
well. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : No
Focal length : 21.0mm (35mm equivalent: 104mm)
CCD Width : 7.06mm
Exposure time: 0.020 s (1/50)
Aperture : f/3.5
Focus Dist. : 2.27m
Metering Mode: center weight
Jpeg process : Baseline
|
|