Date: | December, 29 2004 at 16:11:15 | Description: | Using a laser, we projected a beam down the side of the car. By following
this beam with a sander, file or otherwise, we were able to make straight
edges all along the car. You can see in this picture, how the side of the car
glows when it is in contact with the laser. We basically sand until the whole
side glows, and then we know we have it correct. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 35mm)
CCD Width : 7.06mm
Exposure time: 1.000 s
Aperture : f/2.0
Focus Dist. : 1.83m
Metering Mode: center weight
Jpeg process : Baseline
|
|