Date: | November, 08 2005 at 21:01:54 | Description: | Alot of work has been done on the car now. You can see that all the
tail lights and the side marker has been cut out. We have also cut the sides
of the rear hatch out, to allow the hatch to be opened. You can see the
side peices on top of the car. The whole passenger side and rear has been
coated in drywall compound to form a nice, smooth form. I have also covered
the wheel up. It will not stay this way, rather, it allows me to make a
very simple piece for the side, and cut the wheel well out afterwards from
the finished fiberglass. The shaping and initial 80 grit smoothing on the
passenger side is now nearly done. You may also notice that the rear window
is gone. This will be replaced with a different window and some molded
accents in the future. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 36mm)
CCD width : 7.06mm
Exposure time: 0.017 s (1/60)
Aperture : f/2.0
Focus dist. : 8.61m
Metering Mode: center weight
|
|