Date: | November, 15 2006 at 19:49:55 | Description: | The first mold section is applied. We used wooden dividers covered in
aluminum foil and wax, to make the mold flanges. Basically, we set a flange,
spray the car in gel coat, and then layer on the glass. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 36mm)
CCD width : 7.06mm
Exposure time: 0.017 s (1/60)
Aperture : f/2.0
Focus dist. : 4.96m
Metering Mode: center weight
|
|