Date: | September, 18 2007 at 22:55:41 | Description: | In this picture, you can see the vertical piece we welded along the hatch
side frame. This is what forms the hatch-side of the gap, and gives it the
seamless appearance. You can also see where we welded the steel in to form
the edge from the speaker box to the side of the car. Underneath the welding
blanket you can make out the vinyl that is wedged between the steel and the
side of the box (it's the white fabric sticking out). | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 36mm)
CCD width : 7.06mm
Exposure time: 0.017 s (1/60)
Aperture : f/2.0
Focus dist. : 1.83m
Metering Mode: center weight
|
|