Date: | December, 20 2008 at 10:42:42 | Description: | These are the sides of the rear wing mounts. They have been complete for
quite some time, but I'm not ready to weld them in. The white piece is the
foam buck for the wings. The light brown piece is a hammerform made with
two pieces of MDF glued together, and then sanded to give the right curves.
Each piece of steel was clamped onto the hammerform to make two left and two
right sides. These need to be welded together, and then welded onto the
rear deck plate. Finally, a wing will be attached between them. | Camera Settings: | Camera model : KODAK V550 ZOOM DIGITAL CAMERA
Resolution : 2576 x 1932
Flash used : Yes (auto)
Focal length : 6.2mm (35mm equivalent: 36mm)
Exposure time: 0.017 s (1/60)
Aperture : f/2.8
ISO equiv. : 80
Whitebalance : Auto
Metering Mode: matrix
Exposure : program (auto)
|
|