Date: | July, 09 2007 at 13:11:42 | Description: | After an aborted attempt to build the wing out of fiberglass, I decided to try
my hand at making it in steel. This is my first attempt. I took a length
of steel, and basically beat the tar out of it with the tools you see here,
and tried to duplicate the curve of the leading edge of the wing support. It
actually turned out pretty good, but eventually I discovered a better way to
do it. | Camera Settings: | Camera model : Canon PowerShot G1
Resolution : 2048 x 1536
Flash used : Yes
Focal length : 7.0mm (35mm equivalent: 36mm)
CCD width : 7.06mm
Exposure time: 0.017 s (1/60)
Aperture : f/2.0
Focus dist. : 1.83m
Metering Mode: center weight
|
|