Date: | July, 31 2007 at 21:31:18 | Description: | Now we finally have to solve the problem with the gap between the side of the
car and the speaker box. We came up with a rather ingenious solution to this
problem. Basically, we bent up a chunk of steel to fit the gap, and then sat
some vinyl behind it, and then screwed the steel to the box, sandwitching the
vinyl between it and the box. This will give us a nice clean edge for the
transition. The idea is, that once the steel panel is done on the window, that
we can roll the vinyl up onto the inside of the window, and have one smooth
peice from box to celing. | Camera Settings: | Camera model : KODAK V550 ZOOM DIGITAL CAMERA
Resolution : 2576 x 1932
Flash used : Yes (auto)
Focal length : 6.2mm (35mm equivalent: 36mm)
Exposure time: 0.017 s (1/60)
Aperture : f/2.8
ISO equiv. : 125
Whitebalance : Auto
Metering Mode: matrix
Exposure : program (auto)
|
|