Date: | July, 31 2007 at 23:26:51 | Description: | And now, we bend the piece down to meet the inside edge of the window. Once
that was done, we tacked it in place. The vinyl is underneath the welding
blanket, to try and keep it safe. If you look up to where the hatch strut is
located, you might also be able to see the steel we welded into place there.
That steel strip replaces the plastic moulding that goes between the hatch
and rear side windows. | Camera Settings: | Camera model : KODAK V550 ZOOM DIGITAL CAMERA
Resolution : 2576 x 1932
Flash used : Yes (auto)
Focal length : 6.2mm (35mm equivalent: 36mm)
Exposure time: 0.017 s (1/60)
Aperture : f/2.8
ISO equiv. : 80
Whitebalance : Auto
Metering Mode: matrix
Exposure : program (auto)
|
|